SOLAR PRO 50W LED projector

Specifications of SOLAR PRO 50W LED Projector

EAN 8435568965065
Power 50W
Luminous flux 1500lm
Opening angle 120º
Color temperature 6000K
CRI >80
Interior-exterior Exterior
IP protection IP65
Electrical insulation Class I luminaire
Sensors Twilight sensor (DLR)
A++ energy label
Others
Rechargeable battery
Solar recharge
Remote control included
All-inclusive kit
Product dimensions 45x240x172mm
Packaging dimensions 15x25x36cm
Packaging weight 5Kg
CE RoHS ECORAEE Certificates

Description of SOLAR PRO 50W LED Projector

Includes: Solar panel with connection cable (50cm with copper connectors), Solar panel support, Solar LED projector, remote control and hardware for holding the projector and solar panel.

Functioning:

You can use the LED projector connected to the solar panel or independently, in the latter case it does not work in automatic mode, and is turned on or off from the remote control.

- Automatic mode: This mode is only possible with the solar panel permanently connected, this way the LED projector only turns on when it detects a brightness lower than 50lux, otherwise it will turn off. This way it automatically turns on at night and turns off during the day.

- Manual mode: Pressing the ON/OFF button turns the LED projector on and pressing the same button again turns the projector off. Regardless of the ambient brightness.

Remote control:

ON/OFF button: the LED projector turns on and by pressing the same button again, the projector turns off. Regardless of the ambient brightness.

OFF button: activates/deactivates the light sensor mode.

3H button: activates the LED projector for a continuous period of 3 hours, and repeats the process on subsequent days.

5H button: activates the LED projector for a continuous period of 5 hours, and repeats the process on successive days.

8H button: activates the LED projector for a continuous period of 8 hours, and repeats the process on successive days.

Maximum brightness button: Increases the brightness in 20% intervals until reaching 100%

Minimum brightness button: Decreases the brightness in 20% intervals until it reaches 20%

Characteristics:

- IP65 LED floodlight, without the need for electricity, completely autonomous.
- Led technology with front floor lighting with 6000K white light
- Brightness sensor, with less than 50Lux it turns on automatically.
- High brightness LED technology EPISTAR SMD2835
- Light efficiency 90-100Lm/W. Illuminates an area of approximately 80m2
- High quality and capacity rechargeable Lithium battery: 3.2V/7000mA
- Polycrystalline silicone solar panel (6V-10W)
- Charging time: 6-8 hours of sunshine.
- Use time: 6-8 hours at 100% brightness. By lowering the intensity it can be extended up to 20 hours
- 360º adjustable support, 135º adjustable LED panel to orient in any position.
- IP65 protection

Installation at 3-4 meters high is recommended.